Home

Move directory in R

How to Easily Manipulate Files and Directories in R

Award: Dynamic ETFE Façade | Architect Magazine | Research

Due to the new R 2.11 release, I want to implement Dirk's suggestion here. I'm late to the party but I encountered the same thing when I tried to get fancy and move my library and then had files being saved to a folder that was outdated: Windows Computers, if you copy the address from Windows Explorer, you have to manually change the. You can also change your working directory as follow: Create a sub-directory named R in your Documents folder From RStudio, use the menu to change your working directory under Session > Set Working Directory > Choose Directory. Choose the directory you've just created in step The idea is that if one day I decide to move my entire SurveyAnalysis1 folder/directory to another location, or perhaps open this up on a different computer, all the file paths specified in my R scripts would still work as long as I start the session through opening the .Rproj file 0 for success, 1 for failure, invisibly. Not deleting a non-existent file is not a failure, nor is being unable to delete a directory if recursive = FALSE. However, missing values in x are regarded as failures. In the case where there is a folder foo the unlink call without recursive=TRUE will return 1 The mv command (short from move) is used to rename and move and files and directories from one location to another. The syntax for the mv command is as follows: mv [OPTIONS] SOURCE DESTINATION The SOURCE can be one, or more files or directories, and DESTINATION can be a single file or directory

R: How to create, delete, move, and more with files - Open

  1. setwd(paste0(getwd(), /Statistical Analysis)) Tip: If you are using RStudio you can use the shortcut Ctrl + Shift + H to browse to the desired directory. Creating a list of files and folders in a directory You might also want to create a list of all the files or folders in a directory
  2. Nov 30, 2011. #3. Yes. R has the ability to make directories and write files, which is all you're doing. I don't know if Dason's method will create the directory if it doesn't exist, though. So, look up the appropriate functions and play around with it. R also can run windows commands by sending stuff to the command prompt, basically
  3. Suppose if you want to create a subfolder under the current directory you can choose the paste command and can set the working directory. setwd(paste0(getwd(), /SubFolderName)) If you are using RStudio then press Ctrl + Shift + H and choose the desired directory. 3
  4. I want to move files from one directory to another only the latest file names are like this filename20190904.csv. I want to move these from one folder to other and replace the files with latest. And also want to exclude one file from source folder. any help would be appreciated
  5. R is always pointed at a directory on your computer. You can find out which directory by running the getwd (get working directory) function; this function has no arguments. To change your working directory, use setwd and specify the path to the desired folder

Importing data into R using a relative path. This example assumes you're not running an R (.r or .R) file via a Project in R (see the option described below).We have an R file saved in a sub-directory, along with a csv file in the same directory, that we want to import data from working directory of the Rprocess; setwd(dir)is used to set the working directory to dir You can change your working directory as follow: Create a sub-directory named R in your Documents folder From RStudio, use the menu to change your working directory under Session > Set Working Directory > Choose Directory. Choose the directory you've just created in step On Linux systems, including Ubuntu the mv command can be used to move or rename files and directory It is also commonly used when creating a back up of existing files and folders.. If you're a student or new user looking for a Linux system to start learning on, the easiest place to start is Ubuntu Linux OS If it's hard to use pure shell commands, then you can install Midnight Commander, console application that makes it easier: $ sudo apt-get install mc. In Midnight Commander to move folder or file from one panel to another is F6, copy F5. $ mc. If you need root access. $ sudo mc. If you want to have a mouse support. $ sudo apt-get install gpm

r - How to move backward parent folder - Stack Overflo

  1. mv is one of the must known commands in Linux. mv stands for move and is essentially used for moving files or directories from one location to another. The syntax is similar to the cp command in Linux however there is one fundamental difference between these two commands. You can think of the cp command as a copy-paste operation
  2. Move that file to the folder you want, say Project1 under My Documents. Double-click on start.rdata. This should launch R with the working directory in the folder Project1. Save your workspace with the GUI or save.image to create a .RData file in the folder Project1
  3. Introduction to Linux Move Folder. The move command in Linux is a command-line utility that allows one to move one or more files or directories from the source to destination. The Move command can move single or multiple files or directories from source but the destination should be only one path or file
  4. How do I move a directory under Linux operating systems? To move SOURCE directory to a DEST directory use the mv command as follows: ADVERTISEMENT. mv source dest mv / path / to / source / path / to / dest. In this example, move /home/vivek/data/ directory to /nas/home/vivek/archived/ directory
  5. Move a Directory using Python. So far you have seen how to move a file in Python. Alternatively, you may move a directory using this template (without specifying any file extension)
  6. You can also use mv to move a whole directory and its content: mv includes/* ./ This will move all files (and folders) from the includes/ directory to the current working directory. In some cases, however, you will need to only update and move only files that were changed, which you can do by passing -u as an argument to the command
  7. The project folder I'm working with is a fairly standard package folder under version control. The package I'm working on is called azureml.So in the screenshot below you see my RStudio project file, the git artifacts as well as the tarball for the built package (i.e. the result of R CMD build).You may notice that I keep the package itself in a daughter folder, also called azureml

If you ever go to the wrong directory and want to turn back, type the following command: cd . . This allows you to move up a level. A Navigation Tip. If you want to be a bit more efficient with your directory changes, type cd on the command line, followed by the first few letters of the directory you want. Then, press Tab to autocomplete the. You can't move this folder in RStudio 1.2. As @mara discovered, the path is hardcoded in RStudio itself, so there's no way to use a different location.. However, we have made this path configurable in RStudio 1.3, which adds compliance to the XDG Base Directory Specification

installation - How do you change library location in R

Get and Set working directory in R - DataScience Made Simpl

  1. move a directory in Linux from source to target. I want to move directory from one location to another location, Then possible conditions are two. Condition 1: Move the directory from Current Location to the desired destination. Then the syntax will be as below
  2. -r . moves directory and all its contents (files, subdirectories, files in subdirectories, and so on). For example, mv -r dir1 dir2 moves the entire contents of dir1 to dir2/dir1. mv creates any directories that it needs. -v . prints file names to standard output as they are being processed
  3. Is there a one-liner that allows me to create a directory and move into it at the same time?Helpful? Please support me on Patreon: https://www.patreon.com/r..
  4. To move files to a different directory on the same drive, highlight the file(s) you want to move, click and drag them over to the second window, and then drop them. If the destination folder is on a different drive, click and drag them over to the second window just like before, but this time press Shift to trigger the Move mode

RStudio Projects and Working Directories: A Beginner's

When you specify a single source file and the target is not a directory, mv moves the source to the new name, by a simple rename if possible. You can also use mv to move files to and from MVS™ data sets. If you specify more than one file to be moved, the target (last path name on command line) must be either a directory or a partitioned data set A mv that does not do that, i.e. which renames a directory a to b, but keeps a/1 as a/1, is not what people understand when they refer to moving something: When you move a cupboard, the contents of the cupboard are moved as well. That other operation, moving a directory without its contents, is also already available, it's called mkdir

How to remove a directory in R? - Stack Overflo

  1. You should be able to move around in your own directory and to copy files to and from your local machine using the FTP interface commands given on the following page. Anonymous FTP At times you may wish to copy files from a remote machine on which you do not have a name
  2. Remarks. This method creates a new directory with the name specified by destDirName and moves the contents of sourceDirName to the newly created destination directory. If you try to move a directory to a directory that already exists, an IOException will occur. For example, an exception will occur if you try to move c:\mydir to c:\public, and c.
  3. g tutorial/post we are discussing the Command to delete a directory in R. Why : Though Operating systems will have simpler way of doing this however when you are working in the program
  4. Use this command to move the contents of a storage pool container to another container if a storage pool directory is removed or if a container is damaged. You can also use the command to consolidate data and reclaim space. You can issue this command for directory containers and cloud containers
Imhotep

Cmdlet. Move-Item cmdlet is used to move a directory by passing the path of the directory to be moved and destination path where the folder is to be moved.. Example 1. In this example, we'll move a folder D:\Temp\Test to D:\Temp\Test1. Type the following command in PowerShell ISE Consol Sep 20, 2018. #2. Hi Mani, - If you would like to do it in a straight forward way using a Code stage then refer Post # 3 which is for renaming a folder. Likewise use the below line of code for moving a folder. Code: My.Computer.FileSystem.MoveDirectory (C:\Directory1, C:\Directory2, True) The last parameter is True if existing directories. pwd 'print working directory' displays the name of the current directory cd 'change directory' command will change the current directory to the directory specified as the argument rm 'remove' command deletes ordinary files in a directory. mv 'move' command moves a file from one location to r Replace character under cursor. R. The move is blocked even when the virtual machine isn't one of the resources being moved and isn't in one of the resource groups for the move. When you receive this error, you have two options. Either move your resources to a resource group that doesn't have a virtual network, or contact support robocopy C:\source\ C:\destination\ /move /r:0 /w:0 /dcopy:dat /copy:dat Only move files in root of the specified folder, it does not goes beyond (cut everything possible; (recursively)). So it doesn't move anything at all. Worse, the destination folder dissapear from the explorer after tha

Move an email folder. In the Folder list, click and hold on the folder name, then drag the folder to a new location. You can drag-and-drop folders within one mailbox or Outlook Data Files (.PST) or between mailboxes and Outlook Data Files (.PST). You can also right-click a folder in your folder list and then select Move Folder from the context. Make a backup copy the game you want to move on your computer. Navigate to the game installation directory. (Default: C:\Program Files\Epic Games\[Game Name]) Copy this game folder to another location on your computer. Open the Epic Games Launcher. Click on Library. Locate the game you want to move

The .Rprofile file in the project's main directory (if any) is sourced by R; The .RData file in the project's main directory is loaded (if project options indicate that it should be loaded). The .Rhistory file in the project's main directory is loaded into the RStudio History pane (and used for Console Up/Down arrow command history) Moving nodes inside a working copy does more than just change directory listings (it will copy files, manage temporary files, and expand keywords) and may be significantly slower. Also bear in mind that a WC → WC move in a mixed-revision working copy may yield unexpected results (see the section called Mixed-revision working copies ) To move a directory with or without content to its new name just like how you would use the mv command to rename a file:. mv -T dir1 dir2. where:-T treats the destination as a normal file; dir1 is the original name of the directory; dir2 is the new name of the directory; NB: dir2 doesn't have to exist. I hope this saves someone a lot of time, as a noob, before this, I would create a directory. The following code snippets are on creating a connection to Azure Data Lake Storage Gen1 using R with Service-to-Service authentication with client secret and client id using REST API to list, create and move any folder in a azure data lake store gen1

Video: How to Move Files and Directories in Linux (mv Command

In the Move Items dialog, select the folder where you want to move all the files. To create a new folder, click Make New Folder button and assign the folder name accordingly. Once selected the folder, click Move Re: Move VeeamFLR Folder Post by TomBlue » Wed Nov 06, 2013 7:09 am this post After installing Patch 1 of Veeam B&R 7.0 the temporary files and folders in AppData\Local\Temp are cleaned properl

Working with files and folders in R - Master Data Analysi

  1. Move between the Outlook window, the smaller panes in the Folder pane, the Reading pane, and the sections in the To-Do bar. Tab key or F6. Move between the ribbon and the calendar. F6. Show the access keys in the ribbon. Alt or F6. Move around message header lines in the Folder pane or an open message. Ctrl+Tab. Move between the Navigation pane.
  2. The Move-Item cmdlet moves an item, including its properties, contents, and child items, from one location to another location. The locations must be supported by the same provider. For example, it can move a file or subdirectory from one directory to another or move a registry subkey from one key to another. When you move an item, it is added to the new location and deleted from its original.
  3. To automatically move emails to a folder in the HTML version of Gmail on iOS or Android: Click the Create a filter option next to the search bar. Choose search criteria to specify which emails will be affected by the filter. Test the search criteria by clicking on the Test Search button. When you're happy with your search criteria.
  4. See our move command reference for full information, available options, and other examples on this command.; How to move files in macOS. There are several ways to move files in macOS.. Drag-and-drop. In the macOS Finder, you can drag-and-drop one or more file icons, moving them from one folder to another. To drag-and-drop a file, highlight the files you want to move

The xcopy command is a Command Prompt command used to copy one or more files or folders from one location to another location. With its many options and ability to copy entire directories, it's similar to, but much more powerful than, the copy command. The robocopy command is also similar but has even more options. Miguel Co / Lifewire Move folder and folder2 to your /tmp directory. mv folder folder2 /tmp/ Move folder and file1 to /home/ directory. mv folder file1 /home/ The previous examples would move files and folders to the new destinations without changing their names. mv command can be used to move a very big number of files and folders in a single command line To copy a directory (and all the files it contains), use scp with the -r option. This tells scp to recursively copy the source directory and its contents. To copy the entire revenge directory from your deathstar.com account to your empire.gov account, enter: scp -r dvader@deathstar.com:~/revenge ~/reveng cp -r source_directory destination_directory. And now if you use ls command on the destination directory, it should have the entire source directory inside it. The -r option allows the recursive option. This means the entire content of the directory including its own subdirectories, everything in the directory will be copied to the destination How to move multiple files into a directory. To move multiple files using the mv command pass the names of the files or a pattern followed by the destination. mv file1.txt file.2.txt file3.txt folder. The following example is the same as above but uses pattern matching to move all files with a .txt extension. mv *.txt folder

Columbia SC 29212. Engineering Hi-Tech/ Information Tech IT Services. MAP. Grow! By ERG. 810 Dutch Square Blvd, Suite 232 Columbia SC 29210. Marketing and Communications. MAP The R directory contains various files with function definitions (but only function definitions - no code that actually runs).. The data directory contains data used in the analysis. This is treated as read only; in paricular the R files are never allowed to write to the files in here.Depending on the project, these might be csv files, a database, and the directory itself may have subdirectories On platforms which allow directories to be renamed, typically neither or both of from and to must a directory, and if to exists it must be an empty directory. file.append attempts to append the files named by its second argument to those named by its first. The R subscript recycling rule is used to align names given in vectors of different lengths

The following example would move a folder named documents, without changing its name, from the current directory to an existing subdirectory of the current directory named /backups: ADVERTISEMENT. mv documents / backups. mv command can be used to move any number of files and folders in a single command. In this example, the following command. Note that if you attempt to replace a file by moving a file of the same name into that directory, an IOException is thrown. To avoid this problem: To avoid this problem: In .NET Core 3.0 and later versions, you can call Move(String, String, Boolean) setting the parameter overwrite to true , which will replace the file if it exists The most simple way is with the 'mkdir' command, simply specify the name of the directory to create afterwards. [ root@rhel8 ~]# mkdir directory. This will create a new directory (or folder) called 'directory' in the current working directory. We can now enter it and use it to store content in There is no way to actually move files using rsync like Linux mv command would do. By using --remove-source-files, you are essentially copying files to the destination and then deleting files (except directories) from the source. This might achieve your purpose to move files but you will NOT save time or i/o operation Hi, I have a requirement which i need to copy excel file from one folder another folder and also want to rename the file with date format in R. sorry if my question is meaningless. copy file from one folder to other folder in R. General. jpappire. March 31, 2019, 7:46am #1. Hi, I have a requirement which i need to copy excel file from one.

Move files from one folder to another using R Statistics

If a path does not exist or is not a directory or is unreadable it is skipped. The files are sorted in alphabetical order, on the full path if full.names = TRUE . list.dirs implicitly has all.files = TRUE, and if recursive = TRUE, the answer includes path itself (provided it is a readable directory). dir is an alias for list.files I would like to setup DFS-R to replicate branch offices files to HQ, so we can perform centralize backup; however, before we do this, we must do the following first. 1. we are going to move user profile from old server(2003) to a new server(2012) in HQ, eg. \\oldsvr\users to\\newsvr\users. 2 Move a container, 0000000000000001.dcf, from the e:\data1\storage\dir1 storage pool directory to the e:\data\storage\dir2 storage pool directory. move container e:\data1\storage\dir1\00\0000000000000001.dcf stgpooldir=e:\data\storage\dir 1. If you want to move all the files from a folder to one of its subfolders you can use the following command: find /myuser/downloads/ -type d -name 'new' -prune -type f | xargs mv -t /myuser/downloads/new. It will find all the files and then move them to your subfolder Directory.Delete (targetPath, true); } So now we have hands on some very basic functions of Directory class. Now explore the class a bit more and move the directory to some other location, add files to it. //move the directory. Directory.Move (srcPath, targetPath); //Create a file in the directory. File.Create (targetPath + @\NR.txt)

Working with files and folders in R-Ultimate Guide R

logs2 represents the destination directory logs2. What if we want to move all the .txt files to a new folder? move .txt files to a folder named text_files In the above example, we first listed all the contents of the current directory and then used the command mv *.txt text_files where . mv represents the move command *.txt represents all the. Specifies whether to allocate the contents of a storage pool container to a new container by default during a MOVE CONTAINER operation. This parameter is optional. You can specify one of the following values: No. This is the default. A container is created, and the contents of the storage pool container are moved into the new container If you want to delete empty source directories after move, use the --delete-empty-src-dirs flag. See the --no-traverse option for controlling whether rclone lists the destination directory or not. Supplying this option when moving a small number of files into a large destination can speed transfers up greatly

Move files and directories to another locatio

You can move operation master roles to a directory server in a different domain if the credentials are the same in both domains. The Identity parameter specifies the directory server that receives the roles. You can specify a directory server object by one of the following values: Name of the server object (name The -data= argument forces the location of the AppData folder, so your startup command may be forcing a specific location. This is required when trying to run multiple instances. On windows this would be /data

Move file or directory from source to dest. Synopsis. If source:path is a file or directory then it moves it to a file or directory named dest:path. This can be used to rename files or upload single files to other than their existing name. If the source is a directory then it acts exactly like the move command To move a file or files, you specify the name and location of the file or files you want to move followed by the destination. The destination specifies the new location of the file, or the new name of the directory. The destination can consist of a drive letter followed by a colon, a directory name, or a combination git-mv - Move or rename a file, a directory, or a symlink In the first form, it renames <source>, which must exist and be either a file, symlink or directory, to <destination>. In the second form, the last argument has to be an existing directory; the given sources will be moved into this directory To copy this folder from one place to another, you'll run: cp -R ~/Desktop/code-project ~/Desktop/code-project-2. This copied my code-project folder (including its contents) into a new folder called code-project-2. The -R is an option that specifies you want the command to run with recursion. Now you can move and copy files and folders. Nice

getwd, setwd R Function of the Da

Author Topic: Move or Copy files to new directory (Read 4680 times) murphysm2342. Jr. Member; Posts: 17; Move or Copy files to new directory « on: January 18, 2017, 05:17:47 PM. -r,--recursive: Browse into sub-directories for additional files.-b,--backup: Make backups. --backup-dir=DIR: Make backups into a matching directory hierarchy.--suffix=SUFFIX: Adds suffix text to the end of backed up files.-d,--dirs: Transfer only directories without browsing inside of them MOVE! is a national weight management program designed by the VA National Center for Health Promotion and Disease Prevention (NCP), a part of the Office of Patient Care Services, to help veterans lose weight, keep it off and improve their health The mv command is used to rename and move files and directories. Its general syntax is: mv [options] argument(s) The arguments are names of files and directories. If two file names are provided as arguments, mv renames the first as the second. If a list of arguments is provided and the final argument in the sequence is the name of an existing directory, mv moves all of the other items into. The standard data directory used for docker is /var/lib/docker. There are various reasons why you may want to change docker's default directory from which the most obvious could be ran out of disk space. This make sense because this directory will store all your images, volumes, etc. it can become quite large in a relative small amount of time

Importing data - absolute and relative file paths in R

In today's video, I'm going to show you how to move such folders as Downloads, Documents and Desktop to another disk in a Windows operating system. Moving. 6. Move only the files that don't exist in the destination directory. When you do mv *, it will move all the files to the destination directory. However, if you want to move only the files from the source directory that don't exist in the destination directory, use the mv -u option as shown below First use the cd (change directories) command to move into the directory where want to create a new directory. Once you're there, run this command (in the example below, DirectoryName is the. To remove a directory that you own, use the rmdir command. For example, to remove a subdirectory named mydir that exists in your current working directory, at the Unix prompt, enter: rmdir mydir. If mydir exists, and is an empty directory, it will be removed The p4 move command takes a file already opened for edit or add and moves it to the destination provided. An open file can be moved many times before it is submitted; moving a file back to its original location undoes the pending move, leaving it open for edit.Using p4 revert on a moved file both undoes the move and reverts the unsubmitted content

National Guard&#39;s vice chief calls Keizer homeMpv Manual

R: Get or Set Working Director

Move a directory in C#. The Directory.Move method moves an existing directory to a new specified directory with full path. The Move method takes two parameters. The Move method deletes the original directory. The following code snippet moves the source directory to the destination directory. string sourceDirName = @C:\Temp Make some room on your SSD or NVME by moving your Documents and Personal files to secondary drives the easy way - relocating your profile storage foldersChea.. How to Move Your Dropbox Folder And Files To Another Drive Easily?Dropbox is a great cloud storage, but when you install the local replication it will instal.. Similarly, you can't move an album to another location, because an album is also an aggregated view of individual files, rather than a folder that's easily moveable as a unit. Tips: If you're signed in to the OneDrive desktop app on your computer, you can use File Explorer (or Mac Finder) to sort, move, and rename your OneDrive files and folders

Running RStudio and Setting Up Your Working Directory

FOR /R. Loop through files (Recurse subfolders) Syntax FOR /R [[drive:]path] %%parameter IN (set) DO command Key drive:path: The folder tree where the files are located.set: A set of one or more files enclosed in parentheses (file1.*, another?.log).Wildcards must be used. If (set) is a period character (.) then FOR will loop through every folder OneDrive: Move files from a directory to root directory. Harry December 20, 2020, 2:44pm #1. It's very simple but I can't get it to work. rclone move onedrive:mydir/** onedrive: -vv. What I want is move all the contents of mydir to root directory. But it does not work. 2020/12/20 20:06:25 DEBUG : Creating backend with remote onedrive:mydir. Now the search configuration tests are not run in a split format, and not against the legacy configuration, we should move test_distributions.js into the same directory - it is testing the configuration, and hence would be better for situations where we are just running the configuration tests. We can also make it so that the tests are able to. The code above will move all the folders that has a file name beginning with temp and if the temp folder has a lot of sub folders will it be moved also? Move-Item C:\scripts\temp* C:\old. With the above command : Yes if the folder\filename name starts with temp

Move Files Directories with mv Command in Ubuntu 18

When using the move and moveto commands in Google Drive on directories, the source gets linked to the destination. The source directory doesn't get deleted (even when using --delete-after flag), and renaming or deleting either the source or destination will affect both of them. On Google Drive web, it shows that the source is located in two. To move a game you currently have installed, right-click its name in Steam's library sidebar, then head to the Local Files tab. Click the Move Install Folder button, and Steam will give you a.

command line - Moving folder and subfolder to another path

The drive is the D drive. We would like to run a bat file that would MOVE not copy all the files older than a given date to a folder called archive. We will delete archive after a few months. I thought easy enough I will use. xcopy *.* /d:12-30-2006 d:\archive. The issues that I then started thinking about is I guess this is because C is used for the operating system and D is used for SYSVOL and NTDS folders. Now I would like to move SYSVOL and NTDS to the C drive so I can configure my backup but it seems the only way to do this is to demote and re-promote the DC. However, this is a live production environment so I can't just do that Move to oxford using a relative-to-home pathname: Your current directory is stenton. Move to oxford using a relative-to-home pathname: user335980 is a new contributor to this site. Take care in asking for clarification, commenting, and answering. Check out our Code of Conduct. user335980 is a new contributor to this site The directory from which you type the sftp command is the local working directory and thus the source directory for this operation. Establish an sftp connection. See How to Open and Close an sftp Connection to a Remote System. You can change to the target directory. sftp> cd target-directory; Ensure that you have write permission in the target. Move an Epic Game to Another Folder, Drive, & PC. I urge you to follow the steps carefully, as this process is a tad bit difficult, and you might lose your whole game data if you make the wrong move. The steps that we will outline below will apply for all three changes in destination, i.e. another folder, drive and/or PC

rememberlessfool: No self, no freewill, permanentSalman Khan | Ayesha Takia | Wanted Movie Stills Photo #148Watch as Huge Waves Split Cargo Ship In Half [VIDEOAshe Interview - &quot;Moral Of The Story&quot; Hit, Songwriting

To move a file or folder on dropbox.com: Sign in to dropbox.com. Click Files. Hover over the file or folder you'd like to move, and click the (ellipsis). Click Move. Click the folder you'd like to move it to or create a new folder. Click Move. To move a file or folder on the Dropbox mobile app: Open the Dropbox mobile app It doesn't make much sense to move a project to a totally different folder structure in terms of finding it back. Nonetheless, if you do desire to always have absolute paths, then reffering back to my previous post, your best bet for now is to reserve a totally separate drive to store all of your project documents, and to never save data there If --list is given, or if there are no non-option arguments, existing branches are listed; the current branch will be highlighted in green and marked with an asterisk. Any branches checked out in linked worktrees will be highlighted in cyan and marked with a plus sign. Option -r causes the remote-tracking branches to be listed, and option -a shows both local and remote branches To move the Pictures folder in Windows 10, do the following. Press the Enter key on the keyboard. You user profile folder will be opened. See the Pictures folder. Right click the Pictures folder and select Properties. In Properties, go to the Location tab, and click on the Move button Can't beleive how good this looks so far - with my first flights around the Ballarat areas in Australia. Questions regarding re-intalling or moving the sim from it's default install location, as I should have changed the default install location. DOH! Can it be re-installed without blowing through another 100gb of data (ie. is there an install package that i can run now that I have the sim. Whether file path is directory. add_biocViews: Add biocViews Field to Description File all_children: Extract all children nodes Apriori.Basket: Convert vector to sparse matrix as.data.frame: Transform to dataframe rules object or calibrate object as.transactions: Transform to transactions attr_herf: Get hypertext reference attributes character.nms: Return character names in matrix or datafram